Cuisinart food processor is one of the most convenient kitchen appliances available. The simple design makes it easy to use and clean up. But to keep it in great condition, you must take care of it properly.
One common question that arises is whether or not the Cuisinart food processor is dishwasher safe? The Cuisinart food processor is safe to clean in a dishwasher, except for its motor base, according to the official Cuisinart website. Let’s look at parts of a Cuisinart food processor that can be washed and how to clean them.
Which Parts of Cuisinart Food Processor Are Dishwasher Safe?
Cuisinart food processors are among the top-rated and most popular kitchen appliances. They can help you slice, chop, shred and mix ingredients for your favorite recipes. Cleaning up after using one doesn't have to be hard, but you need to know which parts of your food processor are dishwasher safe.
All Removable Parts Are Dishwasher Safe
All removable parts of a Cuisinart food processer are dishwashers safe such as the lid, the pusher, blade, and bowl. You can wash these parts by hand too. However, do not wash the motor base since it may be damaged by water.
The food processor comes with a manual guide for cleaning each part separately and how to maintain it in good shape for the longest time possible. Also, you can use water and soap to clean each part if you wash it by hand.
Confirm with the Manual
You can typically put all removable parts of a Cuisinart food processer in the dishwasher, including the lid, pusher, blade, and bowl. If you're not sure if a part is dishwasher safe, check the manual that came with your appliance. Many Cuisinart manuals state that all removable parts are dishwasher safe unless otherwise noted.
The Motor Base Isn't Dishwasher Safe
Don't put the motor base of your Cuisinart food processors in the dishwasher since this part isn't dishwasher safe and could be damaged by water. It contains electric components and wiring that might get damaged by water, thus making them useless. The control panel can also be damaged by water.
Instead, wipe off the motor base with a damp towel or sponge to clean it. You don't need to use soap or detergent to clean it since washing it could damage the electrical components inside.
Cuisinart food processors are designed to be easily dismantled and reassembled. This makes cleaning the individual parts much simpler than if they were fixed to the machine.
Cleaning the Blade
The blade should be removed from the food processor with caution. It is very sharp and can cut you if you are not careful. Once it is out, cleans it by hand using warm water and washing up liquid. For a more thorough clean, place it in the dishwasher along with any other detachable blades.
Lid
The lid on your food processor is made from clear plastic. This means that it's a good candidate for the dishwasher. Clear plastics tend not to be damaged by heat or detergent at the normal temperatures used in dishwashers.
Cleaning the Pusher
The pusher is used to push food into the blade of the food processor. It can be cleaned just like any other piece of equipment on this device, but make sure you do so carefully to avoid injury. Once it has been cleaned, dry it thoroughly before reassembling your food processor.
Cleaning the Processor Bowl
The processor bowl is where all of your ingredients will go before and after being processed by the machine’s blade. It should be washed using warm water and liquid soap before being rinsed in cold water to remove all soap residue. The bowl should then be dried thoroughly before being returned to its place in your Cuisinart food processor.
How to Clean a Cuisinart Food Processor?
The full details on how to clean your food processor are detailed in your manual provided with your purchase.
Cleaning your food processor regularly keeps it running smoothly. If you don't clean the appliance after each use, it might not perform as well for future tasks. This is particularly true for cutting and slicing blades, which can dull quickly if not cleaned properly.
For convenience, here is a short guide as to how to clean your food processor by hand.
Cleaning Parts by Hand
If you don't want to run your dishwasher, wash your food processor by hand. Like most kitchen appliances, the most important thing is to not soak your metal parts in water.
This can cause rusting, which is bad news for any metal appliance. When washing by hand, it's okay to let the plastic parts soak in warm, soapy water while you clean the metal parts separately.
1. Unplug the food processor. Make sure the kitchen appliance is unplugged before removing its parts. Also, ensure that the unit has cooled down.
2. Remove the lid, blade, and bowl from the Cuisinart and place them in your sink. Note: Do not wash any electrical components of your Cuisinart food processors, such as its power cord, as this could damage them and cause electrocution hazards.
3. Put some warm water and a few drops of dish soap in the sink, and then let the parts sit for 5 to 10 minutes.
4. Wash off any food particles that may be stuck on the parts with a sponge or a dishcloth.
5. Dip a soft brush into the soapy water and scrub any part that has hard stains or food particles.
6. Remember to rinse the parts with clean water before drying them
7. Dry the parts by hand with a towel. Allow them to air dry until thoroughly dry before reassembling your processor.
Cleaning the Motor Base
If your motor base needs cleaning, use a damp cloth with a little bit of dishwashing liquid. Don't immerse the motor in water. If there is any residual food on the base of the device, scrub them off with a soft brush after you finish cleaning the base, dry all surfaces with a clean towel.
Using a Dishwasher
You can use a dishwasher to clean removable parts of your food processor, but make sure you use the top rack of the dishwasher, according to the Cuisinart food processor guide manual, and place them in a way that they don't touch any other items while being cleaned.
1.Unplug the food processor, and disassemble it before cleaning it. Remove the blade, pushers, and bowl from the motor base.
2.Open the dishwasher and place all of the removable parts onto the top rack of the dishwasher. Put the detergent and run. Remove once finished.
3.Allow the parts to dry on a countertop for about 30 minutes before reassembling them into the unit.
Wipe down the motor base with a damp cloth. Do not submerge the motor base in water or get it wet, as this can cause damage to your food processor.
Is Cuisinart 14 Cup Food Processor Dishwasher Safe?
The 14-cup Cuisinart Food Processor is a must-have for a serious cook. It comes with all the bells and whistles you could want in a food processor, including the power to slice, chop, shred, grate and puree all of your favorite ingredients.
It is the best food processor to have since it can even mince garlic or herbs thanks to its high-performance blade and reversible slicing/shredding disc.
Yes, I have one, and all removable parts are dishwasher safe, including its bowl, lid, and blades. Some people have reported that the feeding tube is a little too large for their dishwasher to clean, so they just wash it by hand - see slighty smaller Vitamix model.
Is Kitchenaid Food Processor Dishwasher Safe?
Most food processors such as Kitchenaid and Hamilton have dishwasher-safe parts. All removable parts are dishwasher safe and should be placed on the top rack only. To clean the base, wipe it clean with a damp sponge or dishcloth and dry thoroughly.
Blenders are also dishwasher safe such as Cuisinart countertop blenders. The blender blades, bowls, lid are easy to clean with mild dish soap and warm water.
How Often Should You Clean a Food Processor?
If you use a food processor regularly and you're ever wondering how often you should clean it, the answer is immediate. Food processors are not hard to clean (see also if Ninja food processors are dishwasher safe).
You don't want to leave something as important as your food processor dirty for long periods of time, because it can grow bacteria and mold.
Also, the more you let your food processor sit around with stuff caked on the blades and sides of the bowl, the harder it will be to clean. If you have a dishwasher-safe bowl, blade, and lid, then yes, you can put it in the dishwasher. However, if you have a machine that is not dishwasher safe, then you will want to hand wash it with warm soapy water instead.