The Ninja Food Processor is a powerful appliance that is used to create delicious and nutritious meals. The company Ninja kitchen produces various models of food processors, including the Ninja Mega Kitchen System, the Ninja Master Prep Professional, and the Ninja Master Prep QB1004.
However, the question that most people ask about this particular kitchen appliance is; Is Ninja food processor dishwasher safe? Yes. The removable parts of a Ninja food processor are dishwasher safe. This includes the bowl, lid, and blades.
The one exception is the base of the unit. Because there are electrical components within the base of each model, you should only clean it by hand.
Are Ninja Food Processors Dishwasher Safe?
If you’re the type who makes a mess in the kitchen, then you need to buy a dishwasher-safe ninja food processor to make your life easier.
The biggest problem that many people have with their appliances is that they are not dishwasher safe, and this means that they have to be cleaned by hand, which can get messy if you don’t know what you’re doing.
This is why you should always check the manual before you buy an appliance just to make sure that it is dishwasher safe.
Confirm with its Manual
Every food processor is unique. Before you put your Ninja food processor in the dishwasher, review the manufacturer's instructions to confirm that it's safe to do so.
If you can't find your manual, check with the manufacturer or retailer to see if a new manual is available or if they can tell you which parts of your model are dishwasher safe.
Generally speaking, the removable parts of a food processor are likely to be dishwasher safe.
Removable Parts
A food processor has a lot of removable parts, which make it easy to clean. These include the lid, bowl, blades, and pusher. Each of these parts can be placed in your dishwasher.
The Motor Base Isn't Dishwasher Safe
The one part of your food processor that you shouldn't place in your dishwasher is the motor base. The motor base shouldn't be washed in a dishwasher as it could get damaged if it was. This is because there are electronic components inside that may be damaged if they get wet. It's better to wipe it down with a damp cloth instead of washing it in a dishwasher.
Cleaning the Ninja Food Processor Bowl
There are different parts that make up the food processor. The bowl is a key part, as it holds all the ingredients you will be processing. Because you will constantly be chopping and processing food, the bowl is bound to get messy. Cleaning the bowl is important to ensure that the next recipe you make tastes fresh.
If you do not clean it immediately after use, you can easily just leave it for a few hours to soak in water before you wash it out. This will give your bowl enough time to soften up so that the build-up of food will be easier to remove.
The Ninja processor bowl can be washed in the dishwasher, but it needs to be placed on the top rack only.
Cleaning the Blades
The blades are an essential part of a Ninja food processor. The blades are attached to the base of the bowl inside the processor, and they chop, dice and shred food that is placed in the bowl.
There are some blade assemblies that are designed for general use, while others are more specialized and can only be used for certain tasks.
Why You Should Clean the Blade Assembly Regularly
Cleaning your Ninja food processor blades after every use is a good habit to get into. It'll help your blades stay sharp and will remove any leftover particles stuck on the blades from your last use.
Also, cleaning your blades will not only make them last longer, but it will also help prevent any cross-contamination between foods, which can be dangerous for the health of you and your family.
Place the blade assembly in the dishwasher and allow it to run through a full cycle. Remove the blades from the dishwasher, and inspect them to ensure that all food particles are gone. If you notice any spots that still need to be cleaned, wipe them with a clean cloth or sponge dipped in warm water. Rinse thoroughly, and dry with a clean towel.
If you don't have a dishwasher, you can wash your blades by hand in a sink full of warm soapy water. Be careful when doing this, as they're very sharp.
Cleaning the Pusher
The pusher is the plastic piece that’s used to push food down through the feed tube while the processor is running. It’s important to clean the pusher right away after using it, as food can get stuck in its nooks and crannies.
Washing your Ninja food processor pusher in your dishwasher is an easy way to get it clean.
Because the pusher has crevices, it can be difficult to clean by hand.
The pusher can also be washed in the same manner as the bowl by placing it into your dishwasher on the top rack. Do not use a scouring pad or brush on any parts of the Ninja food processor, as they may scratch or damage these plastic parts.
How to Clean Nutri Ninja Dishwasher Safe Parts
Cleaning Parts by Hand
Cleaning a food processor is easy. You just need to follow a few simple steps, and you'll have a clean machine in no time.
Step 1: Disassemble The Ninja Food Processor
Before disassembling the machine, unplug it. Food processors have electrical components that can be damaged when wet. It's safest to unplug them before getting started.
Take apart everything that can be removed. The food processor should be completely disassembled before cleaning it thoroughly. You should be able to separate these parts from one another: bowl, blades, and lid.
Step 2: Fill The Sink with Warm, Soapy Water
Fill the sink with warm, soapy water. Some Ninja models come with special cleaning brushes that help remove stuck-on bits of food from the bowl, lid, and blades. If you don't have one of these brushes, you can use an old soft one instead.
Step 3: Wash The Bowl and Lid
Start with the bowl and lid and add each to the soapy water. Allow the parts to soak for five to 10 minutes in the warm, soapy water. This will loosen any stuck-on gunk and make it easier for you to clean.
If you prefer to wash them by hand, just give them a quick scrub with some soapy water. Don't worry about getting into all the nooks and crannies of them to remove all dirt.
Step 4: Rinse The Components in Warm Water
Rinse all parts under running warm water. Use one hand to hold each piece under the stream of water while you use your other hand to scrub with a clean sponge or dishcloth. This will help get rid of any remaining soap suds and debris on your food processor parts.
Step 5: Wipe Down the Base of the Food Processor
Wipe down the base of the food processor and cord with a damp cloth, and then dry thoroughly. Don't submerge it in water. The base of your food processor is the part that houses the motor. This is the most sensitive part of a food processor, so you want to make sure it does not get water.
Step 6: Dry The Components with A Dish Towel
Now that everything is clean, it's time to dry off all the parts and get ready for reassembly. Dry each component thoroughly with a clean dish towel before moving on to the next step.
You'll get the best results if you towel off larger pieces first, such as the bowl, and then focus on smaller items such as the blade, feed tube, and pusher.
Once you've finished cleaning your Ninja food processor, it's important to check all of the removable parts to ensure they're fully dry before putting them back into the machine. Otherwise, they could rust over time and cause damage.
Using a Dishwasher
If you have a dishwasher, you can use it to clean your food processor. Be sure to check the manual to make sure that all of its removable parts are dishwasher-safe. If you’re not sure, wash them by hand instead.
1.Unplug the processor. Before you do anything else, make sure the food processor is unplugged. You don’t want to get electrocuted while you clean it.
2.To clean the Ninja food processor using the dishwasher, you must first disassemble it into its main parts. Remove the S-blade and other interchangeable from the base of your machine. The S-blade is detachable; just turn it counterclockwise to release it from the bowl.
3.Empty any leftover ingredients from the bowl. If there are stubborn bits left behind, remove them using a spatula or knife.
4.Place the bowl, lid, and blades on the top rack of your dishwasher, then run it on a normal cycle.
5.Allow the parts to dry thoroughly before reassembling them and using them again.
6.Next, wipe down the motorized base using a microfiber cloth. Wiping down the base will help remove any excess food particles or debris that might be on it.
Don't forget, though, that your food processor is an electrical appliance and should never be submerged in water. You also don't want to get any of that soapy water onto the electrical components, or you might damage or break them.